If your basement frequently floods and the soil directly outside your home seems drenched most of the time, then you likely have a drainage issue that needs to be sorted out. A construction expert can add a french drain or a drain tile to your property to assist with this. The drain tile will involve the placement of gravel close to the foundation line. A PVC pipe with a variety of holes will be added over the gravel and this pipe will be connected to another that moves water away from your home once it enters the pipe. Drain tile installation requires the earth to be dug up so the bottom edge of your foundation is visible. Your contractors may suggest some other waterproofing techniques while the concrete is exposed. This article will explain what these techniques are and how they can keep your home as dry as possible.
Why Is It Done?
Concrete is considered one of the hardest and most stable materials made up of cement, sand, water, and rock aggregate material. The concrete is formed into solid blocks and steel beams are often inserted directly into the concrete to help provide strength. Generally speaking, the average foundation weighs over seven tons and it is supposed to retain the weight of a 50 or more ton house.
However, the concrete will crack over time, regardless of its strength. This happens for a variety of reasons. Shrinkage is one problem that will cause cracks and it involves the evaporation of the water from the concrete mixture. Settlement of the soil around and underneath the foundation can cause damage too, and so can pressure applied to the exterior edge of the concrete. Unfortunately, these openings can allow water into your basement, and they can erode further over time until a larger section of your foundation crumbles away.
How Is It Done?
There are a wide variety of ways that a foundation will be repaired from the inside of your home. Concrete patches, injection molding, and the placement of sealing paint are a few options. However, the outside of the foundation will continue to be exposed to water and ice. This means a more durable crack filling solution is needed. The addition of a gritty clay material called sodium bentonite can be used for this purpose. The cracks are located in the foundation and the clay is usually mixed with a small amount of water and spread on the cracks. The sodium bentonite then expands to fill in the opening and it hardens afterwards.
Why Is It Done?
Patches and the addition of a drain tile system can go a long way in preventing foundation damage and general leaks. However, water will still place some pressure on the concrete, and soil will still settle and shift. This is especially true as the ground goes through its freeze and thaw cycles each year. While the sodium bentonite is sure to keep old cracks from allowing water to enter your home, it will not stop new cracks from forming. You can prevent these new cracks from letting in water though if you have a membrane added to the concrete.
How Is It Done?
An emulsion or bituminous membrane is an asphalt-based product that is similar to the material placed on flat roofs and driveways. The membrane helps to create a waterproof seal that is long-lasting, durable, and elastic. This type of membrane as well as elastic polymer or polyurethane coatings can be used on the outside of your concrete foundation. Your waterproofing professional from a firm like Rite-Way Waterproofing can inform you of the best option for your home. The products are usually added with a sprayer, paintbrush, or a roller after the concrete is thoroughly cleaned.
The membrane product will be left to dry, drain tile will be added, and you will be able to enjoy a moisture free basement and a drier property that will not allow mold and mildew to grow in your home.
Do you desperately desire to remodel your kitchen? Before you can begin this worthwhile task, you’ll need to secure a reputable contractor in your area. Inform this professional of your specific wants and needs for your space. For instance, you might wish to remove the wall separating your kitchen from your living room. Your contractor can determine if this wall is a load bearing one. You may also want to move the sink in your kitchen from one location to another one. On this blog, I hope you will discover valuable tips to help you design the kitchen of your dreams. Enjoy!